Filters

Industrial Hardware

21 products

Showing 1 - 21 of 21 products

Showing 1 - 21 of 21 products
View
Simpson Strong-Tie H series of hurricane ties provide a positive connection between truss/rafter and the wall of the structure to resist wind and seismic forces. The Strong-Tie H1Z Hurricane Tie features a G185 ZMAX galvanized finish for added corrosion r
Simpson Strong Tie Simpson Strong-Tie H series of hurricane ties provide a positive connection between truss/rafter and the wall of the structure to resist wind and seismic forces. The Strong-Tie H1Z Hurricane Tie features a G185 ZMAX galvanized finish for added corrosion r
$34.75 $52,125.00
For best results in setting our plain rim grommets and washers, use an Osborne No. 500 hole punch and an Osborne No. 216 setting die with corresponding sizes. Also can be set using W-1 & W-3 Machines. Material is brass with nickel finish.
C.S. Osborne For best results in setting our plain rim grommets and washers, use an Osborne No. 500 hole punch and an Osborne No. 216 setting die with corresponding sizes. Also can be set using W-1 & W-3 Machines. Material is brass with nickel finish.
$19.03 $28.55
Simpson APGP Decorative Gable Plates are designed to add strength and stability between a wood beam and three angled wood braces. The black powder coating over ZMAX material provides excellent corrosion resistance, while providing a clean, finished look t
Simpson Strong Tie Simpson APGP Decorative Gable Plates are designed to add strength and stability between a wood beam and three angled wood braces. The black powder coating over ZMAX material provides excellent corrosion resistance, while providing a clean, finished look t
$150.00 $225.00
A complete and affordable kit for consumer use. Each kit consists of a No. 235 grommet die, a No. 245 cutting punch, brass plain rim grommets and washers, a small cutting board and complete instructions.
C.S. Osborne A complete and affordable kit for consumer use. Each kit consists of a No. 235 grommet die, a No. 245 cutting punch, brass plain rim grommets and washers, a small cutting board and complete instructions.
$19.27 $28.91
Outdoor Accents angles make connections between beams and posts stronger and provide more consistent, straight corners for a variety of outdoor projects. These ornamental L angles are Zmax finished first, then black powder coated for long lasting outdoor
Simpson Strong-Tie Outdoor Accents angles make connections between beams and posts stronger and provide more consistent, straight corners for a variety of outdoor projects. These ornamental L angles are Zmax finished first, then black powder coated for long lasting outdoor
$203.99 $305.99
Outdoor Accents T and L straps provide reinforcement for connections where lumber pieces intersect at a 90 degree angle. The angles and straps are installed with the Outdoor Accents structural screws and hex head washers, not included.
Simpson Strong-Tie Outdoor Accents T and L straps provide reinforcement for connections where lumber pieces intersect at a 90 degree angle. The angles and straps are installed with the Outdoor Accents structural screws and hex head washers, not included.
$130.00 $195.00
Outdoor Accents angles make connections between beams and posts stronger and provide more consistent, straight corners for a variety of outdoor projects. These ornamental L angles are Zmax finished first, then black powder coated for long lasting outdoor
Simpson Strong Tie Outdoor Accents angles make connections between beams and posts stronger and provide more consistent, straight corners for a variety of outdoor projects. These ornamental L angles are Zmax finished first, then black powder coated for long lasting outdoor
$74.97 $112,455.00
Outdoor Accents T and L straps provide reinforcement for connections where lumber pieces intersect at a 90 degree angle. The angles and straps are installed with the Outdoor Accents structural screws and hex head washers, not included.
Simpson Strong-Tie Outdoor Accents T and L straps provide reinforcement for connections where lumber pieces intersect at a 90 degree angle. The angles and straps are installed with the Outdoor Accents structural screws and hex head washers, not included.
$131.75 $197,625.00
C.S. Osborne No. 235 Midget Grommet Setting Die #1
C.S. Osborne C.S. Osborne No. 235 Midget Grommet Setting Die #1
$8.86 $13.29
The Simpson Strong-Tie BC series offers dual purpose post cap/base for light cap or base connections. The BC6 post base is approved to be installed with the specified nails or Strong-Drive SD connector screws. The Strong-Tie BC6 post base features a G90 g
Simpson Strong-Tie The Simpson Strong-Tie BC series offers dual purpose post cap/base for light cap or base connections. The BC6 post base is approved to be installed with the specified nails or Strong-Drive SD connector screws. The Strong-Tie BC6 post base features a G90 g
$202.13 $303.19
The Crack-Pac injection epoxy is designed to repair cracks in concrete ranging from 1/64" to 1/4" wide in concrete walls, floors, slabs, columns and beams. The mixed adhesive has the viscosity of a light oil and a low surface tension, allowing it to penet
Simpson Strong Tie The Crack-Pac injection epoxy is designed to repair cracks in concrete ranging from 1/64" to 1/4" wide in concrete walls, floors, slabs, columns and beams. The mixed adhesive has the viscosity of a light oil and a low surface tension, allowing it to penet
$168.00 $252.00
The Strong-Tie ABU series of adjustable post bases provide a 1" standoff for the post and are slotted for adjustability. The Simpson ABU44Z adjustable post base is approved to be installed with the specified nails, Strong-Drive SD connector screws or spec
Simpson Strong-Tie The Strong-Tie ABU series of adjustable post bases provide a 1" standoff for the post and are slotted for adjustability. The Simpson ABU44Z adjustable post base is approved to be installed with the specified nails, Strong-Drive SD connector screws or spec
$62.59 $93,885.00
Simpson Strong-Tie HHUS hanger is a heavy capacity joist hanger that utilizes double shear nailing for added strength. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails,
Simpson Strong-Tie Simpson Strong-Tie HHUS hanger is a heavy capacity joist hanger that utilizes double shear nailing for added strength. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails,
$69.04 $103.56
Simpson Strong-Tie LUS hangers are a light capacity joist hanger that utilize double shear nailing for added strength. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails,
Simpson Strong-Tie Simpson Strong-Tie LUS hangers are a light capacity joist hanger that utilize double shear nailing for added strength. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails,
$16.55 $24,825.00
Simpson Strong-Tie LRU light rafter U hangers are an economic alternative for applications requiring a sloped hanger for rafter-to-ridge connections. Used with solid-sawn rafters, the LRUZ’s unique design enables the hanger to be installed either before o
Simpson Strong-Tie Simpson Strong-Tie LRU light rafter U hangers are an economic alternative for applications requiring a sloped hanger for rafter-to-ridge connections. Used with solid-sawn rafters, the LRUZ’s unique design enables the hanger to be installed either before o
$152.00 $228.00
The PHT-38 is an easy-to-use hammer-drive tool for low-volume fastening. This manual tool is used in conjunction with PHD pins for attachment of steel or wood to concrete or masonry base materials.
Simpson Strong Tie The PHT-38 is an easy-to-use hammer-drive tool for low-volume fastening. This manual tool is used in conjunction with PHD pins for attachment of steel or wood to concrete or masonry base materials.
$35.65 $53,475.00
Cleanout Plug, Recessed Head, Nominal Size 3.5 In, Material of Construction Brass, For Use In Drain Access
Oatey Cleanout Plug, Recessed Head, Nominal Size 3.5 In, Material of Construction Brass, For Use In Drain Access
$22.03 $33,045.00
The W1 is designed to work with the WT wedge-tie products. These products help keep form boards together during construction. Reusable after the footing is poured. Specially designed for low foundation wall applications.Made of 14-gauge galvanized steel.
Simpson Strong-Tie The W1 is designed to work with the WT wedge-tie products. These products help keep form boards together during construction. Reusable after the footing is poured. Specially designed for low foundation wall applications.Made of 14-gauge galvanized steel.
$57,447.00
Simpson 15 degree wire coil, full round head, ring shank roofing nails are ideal for installing asphalt and synthetic slate roofing with power nailers. Compatible with most 15 degree power roofing nailers. Annular ring-shank increases resistance to provid
Simpson Strong-Tie Simpson 15 degree wire coil, full round head, ring shank roofing nails are ideal for installing asphalt and synthetic slate roofing with power nailers. Compatible with most 15 degree power roofing nailers. Annular ring-shank increases resistance to provid
$75.03 $112,545.00
Strong-Tie SD connector screws have been load rated and are specifically designed to replace nails in certain Strong-Tie connectors. Single fasteners load values achieved by the SD screw exceed those of typical 10d common nails.
Simpson Strong Tie Strong-Tie SD connector screws have been load rated and are specifically designed to replace nails in certain Strong-Tie connectors. Single fasteners load values achieved by the SD screw exceed those of typical 10d common nails.
$25.99 $38,985.00
Simpson Strong-Tie HU hangers are heavy duty 14 gauge face mount hangers that have been designed for use in commercial applications. These hangers can be installed into masonry and concrete with the correctly specified Titen screws. The Strong-Tie HU210-3
Simpson Strong-Tie Simpson Strong-Tie HU hangers are heavy duty 14 gauge face mount hangers that have been designed for use in commercial applications. These hangers can be installed into masonry and concrete with the correctly specified Titen screws. The Strong-Tie HU210-3
$46.73 $70.10

Recently viewed