Filters

CMT

52 products

Showing 1 - 24 of 52 products

Showing 1 - 24 of 52 products
View
These new XTREME FLUSH TRIM BITS guarantee the best possible finish along with extra-long life thanks to one-of-a-kind spiral technology. 4 cutting edges in high quality carbide are crafted using special brazing techniques as well as unique positive and n
CMT These new XTREME FLUSH TRIM BITS guarantee the best possible finish along with extra-long life thanks to one-of-a-kind spiral technology. 4 cutting edges in high quality carbide are crafted using special brazing techniques as well as unique positive and n
$60.68 $91.02
for heavy-duty glue line rip cuts with exceptional finish
CMT for heavy-duty glue line rip cuts with exceptional finish
$78.22 $117.33
FINE FINISHING SLIDING COMPOUND BLADE 285.680.12 APPLICATION:for fine finish crosscuts. The 5° negative hook angle limits splintering and “climbing”. MACHINES: radial arm saws and sliding compound miter saws. MATERIAL: soft/hardwood, plywood and lam
CMT FINE FINISHING SLIDING COMPOUND BLADE 285.680.12 APPLICATION:for fine finish crosscuts. The 5° negative hook angle limits splintering and “climbing”. MACHINES: radial arm saws and sliding compound miter saws. MATERIAL: soft/hardwood, plywood and lam
$99.97 $149,955.00
RIPPING BLADE - ORANGE CHROME
CMT RIPPING BLADE - ORANGE CHROME
$63.00 $94.50
INDUSTRIAL LOW NOISE & CHROME COATED CIRCULAR SAW BLADES WITH ATB GRIND 285.chromefine
CMT INDUSTRIAL LOW NOISE & CHROME COATED CIRCULAR SAW BLADES WITH ATB GRIND 285.chromefine
$69.17 $103,755.00
Trim a sink cut-out flush with the bowl in stages using these "over-hang" and flush trim bits. The Delrin® bearings are tapered to match the slope of the bowl's side. A first pass with the over-hang bit cleans the cut-out edge, leaving a slight over-hang
CMT Trim a sink cut-out flush with the bowl in stages using these "over-hang" and flush trim bits. The Delrin® bearings are tapered to match the slope of the bowl's side. A first pass with the over-hang bit cleans the cut-out edge, leaving a slight over-hang
$36.46 $54.69
A very useful hand tool for clean, splinter-free cuts on laminates and veneered with no waste. Place your material into the fence provided and have the cutter run along the edge of the panel. The two opposing steel-made circular cutting blades mounted on
CMT A very useful hand tool for clean, splinter-free cuts on laminates and veneered with no waste. Place your material into the fence provided and have the cutter run along the edge of the panel. The two opposing steel-made circular cutting blades mounted on
$114.68 $172.02
Use a CMT finger pull bit and make a harmonious wooden handle. Two options are available: a template profile made directly in the wood or a European-style hardwood pull as illustrated below.
CMT Use a CMT finger pull bit and make a harmonious wooden handle. Two options are available: a template profile made directly in the wood or a European-style hardwood pull as illustrated below.
$51.00 $76.50
Adjustable at 0.050mm (0.002") increments.
CMT Adjustable at 0.050mm (0.002") increments.
$119.97 $179,955.00
for rip and crosscuts. The large gullets allow deep cuts and effective chip clearance.
CMT for rip and crosscuts. The large gullets allow deep cuts and effective chip clearance.
$49.00 $73.50
for fast rip cuts thanks to the shear angle design.
CMT for fast rip cuts thanks to the shear angle design.
$39.00 $58.50
These new innovative two-flute router bits are equipped with a double bearing and feature a down shear design, which allows for clean smooth cuts on many materials. Therefore it is no longer necessary to flip or move your tool if you need to ride it from
CMT These new innovative two-flute router bits are equipped with a double bearing and feature a down shear design, which allows for clean smooth cuts on many materials. Therefore it is no longer necessary to flip or move your tool if you need to ride it from
$42.99 $64,485.00
ITK PLUS ULTRA FINISH CIRCULAR SAW BLADE P07060
CMT ITK PLUS ULTRA FINISH CIRCULAR SAW BLADE P07060
$23.50 $35.25
A new saw blade which reduces material waste and demand on the saw, while delivering reliable, industrial-quality performance cut after cut! This blade features a heavy-duty steel plate (44 Rockwell) for higher resistance during work, laser-cut heat expan
CMT A new saw blade which reduces material waste and demand on the saw, while delivering reliable, industrial-quality performance cut after cut! This blade features a heavy-duty steel plate (44 Rockwell) for higher resistance during work, laser-cut heat expan
$23.50 $35.25
Special plastic without any plasticizer. -Made in Germany. -Lasts more than 10 years.
CMT Special plastic without any plasticizer. -Made in Germany. -Lasts more than 10 years.
$60.30 $90.45
CMT 800.624.11 3-Piece Adjustable shaker router bit set, 1/2-Inch Shank CMT orange router bits have been rated the #1 overall router bits compared to other brands (Wood Magazine). CMT orange router bits utilize the highest quality bar stock sourced from
CMT CMT 800.624.11 3-Piece Adjustable shaker router bit set, 1/2-Inch Shank CMT orange router bits have been rated the #1 overall router bits compared to other brands (Wood Magazine). CMT orange router bits utilize the highest quality bar stock sourced from
$167.89 $251,835.00
Why interrupt the subtle linearity of an all-wood drawer front or cabinet door with a metal knob or handle? Use a CMT finger pull bit and make a harmonious wooden handle. Two options are available: a template profile made directly in the wood or a Europea
CMT Why interrupt the subtle linearity of an all-wood drawer front or cabinet door with a metal knob or handle? Use a CMT finger pull bit and make a harmonious wooden handle. Two options are available: a template profile made directly in the wood or a Europea
$44.10 $66.15
Create slots, grooves and rabbets in materials from 3,2mm to 18mm in depth by using the adjustable CMT 3-Wing slot cutter set. See chart below for details on spacing and correct cutter combinations. Ideal for biscuit joints and milling perfect tongue and
CMT Create slots, grooves and rabbets in materials from 3,2mm to 18mm in depth by using the adjustable CMT 3-Wing slot cutter set. See chart below for details on spacing and correct cutter combinations. Ideal for biscuit joints and milling perfect tongue and
$90.92 $136.38
Straight Cut Profile Router Bit, Carbide Tipped, 1/2 in Cutter Dia., Fractional Inch, 2 1/2 in, 4 3/8 in, 1/2 in
CMT Straight Cut Profile Router Bit, Carbide Tipped, 1/2 in Cutter Dia., Fractional Inch, 2 1/2 in, 4 3/8 in, 1/2 in
$27.81 $41,715.00
Create slots, grooves and rabbets easily with these CMT slot cutters sets. Ideal for biscuit joints and milling perfect tongue-and-groove joints, these sets include 4 bearings allowing different cutting depths: 7,95mm (5/16”), 9,55mm (3/8”), 12,7mm (1/2”)
CMT Create slots, grooves and rabbets easily with these CMT slot cutters sets. Ideal for biscuit joints and milling perfect tongue-and-groove joints, these sets include 4 bearings allowing different cutting depths: 7,95mm (5/16”), 9,55mm (3/8”), 12,7mm (1/2”)
$189.97 $284,955.00
Cmt 807.190.11 3-1 Flush Trim Bit
CMT Cmt 807.190.11 3-1 Flush Trim Bit
$28.00 $42.00
for heavy-duty cutting, smooth finishing without melting.
CMT for heavy-duty cutting, smooth finishing without melting.
$85.00 $127.50
This CMT three-piece router bit set simplifies door construction, making it easy as 1, 2, 3! It is not the only advantage, in fact this is a multifunctional set for door and furniture makers building entry or passage doors and any furniture tenons. The in
CMT This CMT three-piece router bit set simplifies door construction, making it easy as 1, 2, 3! It is not the only advantage, in fact this is a multifunctional set for door and furniture makers building entry or passage doors and any furniture tenons. The in
$310.41 $465,615.00
Ideal for tongue & groove, shelving and rabbets in solid wood, laminates, melamine & veneered plywood. ORANGE SHIELD COATING protects from heat build-up, gumming and corrosion. INNOVATIVE SETTING POINTS for chipper alignment. Includes shims and spacers
CMT Ideal for tongue & groove, shelving and rabbets in solid wood, laminates, melamine & veneered plywood. ORANGE SHIELD COATING protects from heat build-up, gumming and corrosion. INNOVATIVE SETTING POINTS for chipper alignment. Includes shims and spacers
$119.61 $179,415.00

Recently viewed